fujitsu siemens

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

03.12.2014

How to disassemble the Fujitsu Siemens

Article on how to disassemble and clean the Fujitsu-Siemens Sprimo Mobile U9200

Author: iNik | Added: August 11, 2010 | lot | comments / Views: 24268

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

Today we will talk about disassembling and cleaning a small 12-inch laptop Fujitsu-Siemens Esprimo U9200.

To completely disassemble the laptop. you on the bottom of the laptop remove the following screws (red body, green — to be removed drive):

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

BUT! It’s not to do if we’re going to just clean the laptop :) Now you will understand why.

Turn the laptop keyboard up and remove the panel above the keyboard. She fastened conventional snaps, and she holds the keyboard:

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

Under the laptop keyboard is aluminum plate, which is removed after unscrewing the 8 screws:

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

the Bolts are numbered, but judging by the design, the sequence of loosening not important (plate cannot «tilt» and that the thread to break into the laptop):

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

Removing this protective plate, immediately get to the heat sink, heat pipe and fan laptop. In order for the laptop to clean. all that needs to be removed. The fan of the laptop is attached by 3 bolts (green) the power cable and to remove the radiator you need to Unscrew the 5 bolts (red). And here is the procedure for removing important:

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

As always, show the terrible images:

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

for comparison is the heat sink laptop BEFORE cleaning:

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

AFTER this :

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

the thermal Grease lubricated only the processor of the laptop. and between the chipset and the heatsink already has termonology:

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

Me, after several publications people wrote and asked to talk about where some bolts. Tell —

  • Top row — bottom cover, mount the DVD drive
  • Middle row — aluminum plate under the laptop keyboard
  • Bottom row — mount cooler

IT Blog thinkit.ru How to disassemble a Fujitsu Siemens

P.S. soon, thanks to the efforts of VS Fox-Com will arrive matrix laptop E-machines, so expect an article on how to change the matrix :)

article Summary: the Article is about how to disassemble and clean the Fujitsu-Siemens Sprimo Mobile U9200 fujitsu siemens

Source: IT Blog thinkit.ru How to disassemble the Fujitsu Siemens

Також ви можете прочитати