get a laptop Fujitsu-Siemens Amilo Pro
Talk about the next «patient» — this time it’s a Fujitsu-Siemens Amilo Pro EF6, which I took apart to clean it from the dust.
article manual for disassembly of the laptop Amilo Pro and pictures terrible pilisi, from which I was delivered
About dust in stationary computers I already wrote, the turn came to talk about how to clean the laptop. To do this I’m on the example of the Fujitsu laptop — Siemens Amilo Pro EF6, which I made out specifically in order to eliminate overheating caused by clogged with dust cooling systems.
But, for the beginning of the disassembly of the notebook. Disassemble Amilo Pro is simple enough. To begin, you need to Unscrew all the bolts on the bottom and the back of the laptop (shown by arrows).
while going through the laptop can not be afraid that the bolts would be mixed up — they are the same (in any case enclosure-external). But just in case, disassembling the laptop, which I haven’t had to disassemble, I’m unscrewing the bolts stick them in a soft Foundation on which rests the laptop (expanded polypropylene). Stuck in front of the holes of which was twisted so even unnecessary to remember where unscrewed (here’s a little live-Haq).
After the laptop all the bolts unscrewed from the bottom, flip the «patient». Above the keyboard near the Amilo Pro features a decorative panel with LEDs and power button. It rests only on the latches. I in order to adovart (and without that we not be able to disassemble the laptop), you must podkovernoi it with a screwdriver and neat Tsalkova latch to remove. In the next photo of this socket is no longer there.
After removing the keyboard (it holds only train and socket, which has already been removed), we need to remove the aluminum plate that restricts access to the card and cooling system. Unscrew eight bolts (red — plate, green — fastening of the screen). Those bolts that we remove from here, do not interfere with hull.
Undoing the fastening of the screen, you need to Unscrew the three case screws and then you can completely remove the top cover.
That would pull the motherboard of the laptop Amilo Pro out of the case completely, you need to Unscrew two screws on the Board and another in the back to Unscrew stuecki VGA connector.
Once disassembled, look at the horrors:
at First, I thought about what it felt filter ) this is actually the accumulated dust. Now you understand why the laptop is overheating — it just can’t push the flow of warm air through this dust flap.
the Board of the laptop also needs to be cleaned from dust, since dust accumulates moisture and begins to conduct electricity closing the where to retire should not.
you can Still lubricate fan laptop. I do hydraulic oil ultra-high purity, but you can use regular silicone. In order to lubricate the cooler laptop enough to drip a few drops of oil on the bearing axis, which will appear when you lift the sticker on the cooler (parsed laptop F-S Amilo Pro cooler obslugujemy, unlike samsungusa laptop ). After greasing affix this sticker back, otherwise the bearing or bushing (depends on model) will quickly become clogged with dust.
that’s all. Then assemble the laptop back.
After this procedure I was able to save the laptop from the constant stuttering, spontaneous shutdowns and hysterical cooler howling
Article with friendly site thinkit.ru
article Summary: fujitsu siemens